Search results for: “windows update”

If your Windows 11 laptop says it is plugged in but the battery is not charging, the cause could be the charger, charging port, battery protection settings, overheating, or a battery fault. Follow these checks before assuming the battery needs replacing.

1. Check the charger, cable, and outlet

Connect the adapter directly to a known-working wall outlet. Check that the cable is firmly attached at both ends and look for visible damage. If you use USB-C charging, confirm that the charger and cable support the power level required by your laptop; some USB-C ports are data-only or provide limited power. Use the manufacturer-approved adapter when possible.

2. Check whether the laptop is limiting the charge

Some laptops deliberately stop charging around 60%, 80%, or another threshold to preserve battery health. Look for a battery care, conservation, or charge-limit setting in the laptop maker’s utility or firmware. If a limit is enabled, the behavior may be normal rather than a fault. Change it only if you need a full charge.

3. Let the laptop cool down

If the computer is unusually hot, shut down demanding apps and place it on a hard, flat surface with its vents unobstructed. Charging may be paused when battery temperature is outside its safe range. Allow the laptop to cool naturally; do not put it in a refrigerator or freezer.

4. Restart and install updates

Save your work and restart Windows. Then open Settings → Windows Update and install applicable updates. Check the laptop manufacturer’s support page for model-specific BIOS, chipset, or power-management updates. Follow the manufacturer’s instructions carefully for any firmware update and keep the charger connected.

5. Check the battery status

Open Device Manager, expand Batteries, and check the listed Microsoft AC Adapter and Microsoft ACPI-Compliant Control Method Battery entries. If you choose to uninstall a battery device, do so only when you are comfortable with the process; restart Windows so it can detect the hardware again. Avoid removing unrelated devices.

6. Generate a battery report

Right-click Start, open Terminal (Admin), and run powercfg /batteryreport. Windows will save a report and show its file location. Open it and compare Design Capacity with Full Charge Capacity. A substantially reduced full-charge capacity can indicate battery wear, although the report alone cannot diagnose every charging fault.

7. Inspect the charging connection

With the laptop powered off and unplugged, visually inspect the charging port for debris or damage. Do not insert metal objects or force the connector. If the port is loose, bent, sparking, or smells burnt, stop using it and arrange service.

When to contact support

If the battery percentage continues to fall while connected to the correct charger, try a known-compatible adapter if available. Persistent problems may involve the charger, charging circuitry, or battery and require manufacturer diagnosis. If the battery is swollen, stop using and charging the laptop and seek professional service promptly.

Bottom line: Confirm the charger is suitable, check for a battery charge limit, let the laptop cool, and review updates and battery health. A charging limit or temperature pause may be intentional; ongoing failure may need hardware support.

When Windows 11 displays USB device not recognized, the cause may be a faulty cable, an unstable USB port, a power issue, or a driver problem. Work through these checks in order so you can identify whether the issue is with Windows, the port, or the device itself.

1. Reconnect the device and try another port

Unplug the device, wait a few seconds, and reconnect it. If possible, connect it directly to the computer instead of through a hub or docking station. Try another USB port, preferably one on the computer itself. For a desktop PC, test a rear motherboard port as well as a front-panel port.

2. Check the cable and test another computer

Some USB cables only provide power and do not transfer data. Use the cable supplied with the device or a known data-capable cable. Inspect the connector for visible damage. If the device still is not detected, test it on another computer. If it fails there too, the device or cable may be the problem.

3. Restart Windows

Save your work, disconnect the USB device, and restart the PC. Once Windows has fully loaded, reconnect it. A restart can clear a temporary problem with the USB controller or device detection.

4. Check Device Manager

Right-click Start and open Device Manager. Expand Universal Serial Bus controllers and look for an entry with a warning symbol or a name such as Unknown USB Device. Open its Properties to read the device status. If you can identify the affected entry, right-click it and choose Uninstall device, then restart Windows and reconnect the device. Avoid uninstalling unrelated controllers.

5. Install Windows and manufacturer updates

Open Settings → Windows Update and install applicable updates. Check your computer or device manufacturer’s support page for USB, chipset, dock, or peripheral drivers designed for your exact model and Windows version. Avoid third-party driver download sites.

6. Review USB power settings

If the device disconnects intermittently, open Device Manager and inspect the properties of relevant USB Root Hub entries. If a Power Management tab is available, you can test whether unchecking Allow the computer to turn off this device to save power changes the behavior. The tab and setting are not available on every system.

7. Consider power and compatibility

High-power devices may not work reliably through an unpowered hub. Connect them directly or use a powered hub recommended by the device maker. Also check whether the peripheral requires its own driver, firmware, or a specific USB standard.

When to seek repair

If several known-good USB devices fail on the same port, the port or controller may be damaged. Stop using a physically loose, bent, or unusually hot connector and arrange a hardware check. If only one device fails across multiple computers, contact its manufacturer.

Bottom line: Test another port and cable first, then restart, inspect Device Manager, and install manufacturer updates. Testing the device on a second computer is a useful way to narrow down the cause.

If Windows 11 stays on Preparing Automatic Repair for a long time or repeatedly returns to the same screen, startup may be blocked by damaged system files, a failed update, a storage problem, or a boot configuration issue. Try the safer options first and avoid resetting the PC until you have considered your files.

1. Give the repair process time

If this is the first time the message has appeared, leave the computer connected to power and wait around 30–60 minutes, especially after an update. If the screen remains unchanged for hours or the PC keeps restarting, continue with the steps below.

2. Disconnect unnecessary devices

Shut the PC down by holding the power button, then disconnect USB drives, external disks, docks, printers, and other accessories. Leave only essential devices connected and start Windows again. A peripheral or external drive can sometimes interfere with startup.

3. Open Windows Recovery Environment

When the recovery screen appears, choose Advanced options. If it does not appear, you may be able to trigger Windows Recovery by interrupting startup two or three times: turn the PC on and, when Windows begins loading, hold the power button to turn it off. Do not repeatedly interrupt a computer while firmware or BIOS updates are running.

4. Run Startup Repair

In the recovery menu, select Troubleshoot → Advanced options → Startup Repair. Choose your Windows installation and follow the prompts. This tool attempts to correct certain startup problems without removing personal files.

5. Try Safe Mode and remove recent changes

Go to Troubleshoot → Advanced options → Startup Settings → Restart, then choose Safe Mode if the option is available. If Windows starts, uninstall a recently added driver, application, or update that may have triggered the issue. Restart normally afterward.

6. Use System Restore or uninstall a recent update

From Advanced options, try System Restore if a restore point exists. Alternatively, choose Uninstall Updates and remove the latest quality update if the problem began immediately after it was installed. These options may not be available on every device.

7. Check the drive and seek help if needed

If the drive makes unusual noises, disappears from firmware settings, or startup errors return, stop repeated repair attempts and consider professional assistance—especially if the files are important. A failing SSD or hard drive may need replacement. Back up data before attempting a reset or reinstall whenever possible.

When to reset Windows

Use Reset this PC only after the recovery options above fail and you have backed up important files. Read each screen carefully: reset choices can remove applications and, depending on the option selected, personal data.

Bottom line: Start with waiting, disconnecting accessories, and Startup Repair. Move to Safe Mode, update removal, or System Restore next. If the same loop continues, investigate the storage drive and protect your data before considering a reset.

If your desktop icons disappear in Windows 11, they may be hidden, the desktop shell may need restarting, or the icon cache may have a temporary problem.

Method 1: Show desktop icons

Right-click an empty area of the desktop, select View, and make sure Show desktop icons is enabled.

Method 2: Restart Windows Explorer

Press Ctrl + Shift + Esc, find Windows Explorer, right-click it, and select Restart.

Method 3: Check desktop settings

Open Settings > Personalization > Themes and select Desktop icon settings to review system icons.

Method 4: Restart Windows

Restart the PC and check whether the icons return.

Method 5: Check for updates

Open Settings > Windows Update and install available updates.

Final tip

If only a shortcut disappeared, search for the application from Start and create a new desktop shortcut.

If the Windows 11 taskbar refuses to hide automatically, a notification, application, or taskbar setting may be keeping it visible.

Method 1: Enable automatic hiding

Open Settings > Personalization > Taskbar > Taskbar behaviors and enable Automatically hide the taskbar.

Method 2: Check notifications

Look for applications showing an active notification. Open the notification or close the related application and check whether the taskbar hides.

Method 3: Restart Windows Explorer

Press Ctrl + Shift + Esc, find Windows Explorer, right-click it, and select Restart.

Method 4: Restart Windows

Restart the computer and test the auto-hide option again.

Method 5: Install updates

Open Settings > Windows Update and install available updates.

Final tip

If auto-hide still fails, temporarily close background applications to identify whether a specific program is preventing the taskbar from hiding.

If File Explorer search does not return results in Windows 11, indexing, permissions, or a temporary search process may be involved.

Method 1: Restart File Explorer

Press Ctrl + Shift + Esc, find Windows Explorer, right-click it, and select Restart.

Method 2: Check Windows Search

Press Windows + R, enter services.msc, and make sure Windows Search is running.

Method 3: Check indexing settings

Open Settings > Privacy & security > Searching Windows and review the indexing configuration.

Method 4: Rebuild the index

Open Control Panel > Indexing Options > Advanced and use the option to rebuild the search index if available.

Method 5: Restart the PC

Restart Windows and test File Explorer search again.

Final tip

Searching a very large drive can take time while Windows updates its index, especially after major system changes.

If Windows 11 stays on the shutdown screen or immediately starts again, power settings, drivers, or background software may be responsible.

Method 1: Close running apps

Save your work and close open programs. Then try shutting down Windows again.

Method 2: Restart instead

Choose Restart from the Start menu. A normal restart can clear temporary system processes that interfere with shutdown.

Method 3: Disable Fast Startup

Open Control Panel, select Power Options > Choose what the power buttons do, and review Turn on fast startup. You may need to select Change settings that are currently unavailable first.

Method 4: Update drivers

Install Windows updates and check Device Manager for driver problems, especially chipset and graphics devices.

Method 5: Try a full shutdown

Open Terminal as administrator and use shutdown /s /f /t 0 to test a full shutdown. Save all work first because applications are forced to close.

Final tip

If the PC repeatedly restarts instead of shutting down, investigate power settings and recently installed drivers or software.

A Windows 11 laptop that gets unusually hot can be affected by heavy background processes, blocked airflow, high performance settings, or demanding applications.

Method 1: Check CPU usage

Press Ctrl + Shift + Esc and check which processes are using the most CPU. Close applications you recognize and do not need.

Method 2: Improve airflow

Use the laptop on a hard, flat surface. Keep vents clear and remove visible dust from the ventilation openings.

Method 3: Check power settings

Open Settings > System > Power & battery and review the power mode. A lower power mode can reduce heat during lighter workloads.

Method 4: Update drivers

Install Windows updates and check the laptop manufacturer’s official support page for important BIOS and driver updates.

Method 5: Test demanding apps

Close games or other intensive applications and see whether temperatures return to normal.

Final tip

If the laptop becomes extremely hot, shuts down unexpectedly, or the fans behave abnormally, professional hardware service may be necessary.

Random freezes in Windows 11 can be related to drivers, overheating, storage problems, memory issues, or background software.

Method 1: Check Task Manager

Press Ctrl + Shift + Esc and check CPU, memory, and disk usage when the PC becomes slow or unresponsive.

Method 2: Update Windows

Open Settings > Windows Update and install available updates. Restart the computer afterward.

Method 3: Update drivers

Check Device Manager for devices with warning icons. Update important chipset, graphics, storage, and network drivers from trusted sources.

Method 4: Check system files

Open Terminal as administrator and run sfc /scannow. Restart Windows when the scan finishes.

Method 5: Check temperatures

If freezes happen during gaming or demanding tasks, make sure the PC has adequate airflow and that fans are working normally.

Final tip

If the system continues freezing, test memory and storage health and note whether the freezes occur during a specific application.

If Windows 11 will not let you change screen resolution, the display driver, monitor connection, or Windows display settings may be involved.

Method 1: Check Display settings

Open Settings > System > Display and select the recommended resolution under Display resolution.

Method 2: Restart the graphics driver

Press Windows + Ctrl + Shift + B. The screen may briefly flicker while Windows resets the graphics driver.

Method 3: Update the GPU driver

Open Device Manager, expand Display adapters, and update the graphics driver. For dedicated GPUs, the manufacturer’s official driver may also be appropriate.

Method 4: Check the cable

If you use an external monitor, reconnect the HDMI or DisplayPort cable and try another port if available.

Method 5: Restart the PC

Restart Windows and check the available resolutions again.

Final tip

If the resolution remains limited, check whether the monitor is correctly detected under Settings > System > Display.